Project calculator
Gravel calculator
Convert a rectangular project area and a target depth into cubic yards, then apply a material density to estimate short tons.
Free to use. Your measurements stay in this browser.
Enter your measurements
Results update as you type.
Depth is measured in inches or centimeters.
Short tons per cubic yard. Change the starting value to match supplier information.
Your measurements stay in this browser.
Your planning estimateReady
Gravel volume
1.48cu yd
- Gravel volume
- 1.13 m³
- Gravel volume
- 40.00 cu ft
- Estimated weight
- 2.07 short tons
Calculation and assumptions
length × width × depth, converted to cubic yards and cubic meters.
- The starting density is 1.4 U.S. short tons per cubic yard, a planning placeholder. Gravel weight varies with rock type, grading, moisture, and compaction; replace it with your supplier’s figure when available.
- The project area is treated as a flat rectangle with a uniform depth. The weight is an estimate, not a truck-loading or hauling limit.
Planning estimate only. Confirm measurements and material specifications before ordering or building.
ProjectMeasure estimates are educational planning tools, not professional construction or engineering advice.